Exam : HP HP0-841
Title : Designing and Implementing HP SAN Solutions


1. In a single fabric, when multiple paths exist between a host and its storage, which statement is true?
A. The result could be an unstable fabric.
B. Load sharing is automatically set to static.
C. The FSPF protocol determines best route.
D. The path used is determined by port priority.
Answer: C

2. Three LUNs, sda, sdb and sdc, are connected to a Linux server. You shutdown the server and physically remove sdb. What happens after the server reboots?
A. The LUNs sda and sdc are accessible, LUN sdb is not listed in the device scan.
B. The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.
C. The LUNs sda and sdc are accessible, LUN sdb is listed as offline in the device scan.
D. The LUNs sda and sdc are accessible, LUN sdb is renamed into sdvb simulating a virtual device.
Answer: B

3. What are the three types of fabric zoning on B-series switches? (Choose three.)
A. static zoning
B. software zoning
C. hardware zoning
D. mixmode zoning
E. QuickLoop zoning
Answer: BCD

4. What is the correct statement about zoning in an interoperable fabric?
A. WWPN zoning is the only allowed method.
B. A mixture of domain ID, port number and WWPN zoning is allowed.
C. Domain ID and port number zoning are the only allowed methods.
D. Zoning is not allowed. The only way to segment a fabric is using the VSAN technology of C-Series switches.
Answer: A

5. What is a Fibre Channel fabric?
A. one or more switches connected together, sharing the same name and routing table
B. two or more switches connected together, sharing the same name and routing table
C. one or more switches connected together, each having its own independent name and routing table
D. two or more switches connected together, each having its own independent name and routing table
Answer: A

6. Which three infrastructure components are supported from multiple vendors in an HP Open heterogenous SAN? (Choose three.)
A. hubs
B. switches
C. ATM gateways
D. storage systems
E. operating systems
Answer: BDE

7. What is the internal M-series switch latency of a HP Fibre Channel switch?
A. between 1us and 2us maximum
B. 3us
C. 5us
D. 33us
E. 650us
Answer: A

8. What is the maximum distance per cable segment using 9/125 micron single-mode cable and long wavelength 2 Gb SFPs?
A. 1 km
B. 5 km
C. 10 km
D. 35 km
E. 100 km
Answer: C